1990 Mazda MX-5 "coolant change" Questions

MX5 repair How to change the engine coolant tempreture sensor on a mx5 should be by the thermosat housing, a a fitting with a wire plugged on it.

...coolant and possibly a cam cover gasket depending on condition of your old one they are rubber and you can normally re use them at least once but if there is any sign of leaking before you start ...

...coolant mix ration instead of 50/50 Removing the license plate does help air flow. Clean junk collect in front of the A/C condenser and radiator. Check radiator cap's plastic gasket. Get a Rad-Cap ...

...coolant system was flushed a year and a half ago by a different service provider). I was told that there were no leaks and the dealership would perform a pressure test. The check engine light came on ...

...Change your spark plugs and spark plug wires if they are due (every 30000 miles). The original wires in the NA series MX5 tended to deteriate somewhat and sometimes didn't even make it to 30000 - ...

...gasket was just changed and coolant light lit up on startup. Coolant level is topped up and no leaks. reset the computer, if no change, replace the coolant sensor, but after reset it should ...

...Change the coolant sensor, and the problem should go away. I'm in the UK. I have a 1998 Grand Cherokee. For 2 years I have been getting a 'Coolant level sensor bad' message on the message centre. Two ...

...coolant. After I changed it, all was well again. It's a Pull your oil cap, check on the underside, if its white and thick you need a head gasket. that would explaine why the dealer telling you that ...

2000 vw beetle 2.0 mil code 1256 low coolant level light flashing shortly after warmup. top hose on coolant overflow tank shows flow. Changed coolant overflow tank, changed thermostat, changed water ...

change, the ECM/PCM determines the engine coolant temperature. The voltage will be high when the engine is cold and low when the engine is hot. This information is used to control fuel management, IAC