1983 Mazda RX-7 "remove engine air filter" Questions

Ad

remove carb from engine, take to work surface, disassemble carb,clean all parts with carb cleaner and a soft bristle brush, make sure all jets are clear, blow out with air if you can, reassemble carb,

Ad

...engine will not stay on. what would cause this problem??. try removing air filter and spaying CARB CLEANER in carb while holding open intake rub thouroughly with hand in side carb, start vehicle and ...

Ad

...engine oil (which may have been replaced once during this time) Also during this time someone has tried to hotwire the car, the bottom plate of the steering column has gone missing... As well as my ...

Question about Mazda RX-7

1 Answer

...engine compartment.. unclamp , open box , remove old filter, wipe out box, replace new filter , reclamp box. Cabin filter located under cowl just below windshield. remove cowl bolts / plastic rivets. ...

...REMOVE ENGINE COVER DISCONNECT MASS AIR FLOW SENSOR CONNECTOR.LOOSEN AIRDUCT FLOW TUBE SCREWS THEN REMOVE AIR FILTER COVER HOUSING BOLTS THEN RAISE AIR FILTER COVER UP SLIGHTLY ENOUGH SLIDE IT AWAY ...

Question about Mazda RX-7

1 Answer

...engine 2 x 6mm hex bolts. remove the air intake trunking that sits on the front slam panel and goes to the air filter housing by meens of a flexi square pipe, once this is removed you will need to ...

Question about Mazda RX-7

3 Answers

...remove engine plastic covers by taking out the 5mm allen key bolts,, then remove the pollen filter and cover on the bulkhead, under the filter there are 4 , 30torx bolts , remove these and remove ...

Question about Mazda RX-7

1 Answer

remove the engine air filter. Do I have to remove all the stuff between the filter and the engine? I generally remove the rubber boot behind the filter to the intake housing. should be two hose clamps

Question about Mazda RX-7

2 Answers

engine compartment. Located inside black box-like air filter compartment Should have large house running to the Throttle/Intake. and small hose going to the Valve Cover. To remove: 1. Disconnect small

...engine to filter. Just remove the filter end of air hose, Remove the clamp on filter housing, then pull out filter and replace it. Reinstall the opposite from removal. God-Bless you and your family! ...

Not finding what you are looking for?
1983 Mazda RX-7 Logo

62 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1985 Mazda RX-7
1985 Mazda RX-7

82 Questions

1988 Mazda RX-7
1988 Mazda RX-7

70 Questions

1987 Mazda RX-7
1987 Mazda RX-7

59 Questions

1984 Mazda RX-7
1984 Mazda RX-7

50 Questions

1990 Mazda RX-7
1990 Mazda RX-7

35 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...