...replace the pads only or the pads and rotors.either way if you pushed the calipers back without opening the bleeder screws its possible that you may have push some debris into the abs system causing ...
I replaced my brake rotors on a 2004 gmc canyon and installed new brakes. everything works great, however my abs light stays on now. IF you installed the wrong brake rotors,without the ABS reluctor ...
I recently had my truck--a 2006 GMC Canyon inspected for brakes because there was a squealing noise occasionally when I applied brakes. I had it inspected and the technicians said that I should have ...
...pads, and the passanger side was worn all down to bare metal while drivers side was like new, have replaced both calipers and rotors Have the brake calipers checked, sounds like drivers side is ...
...to replace the routors on a 2006 gmc colorado 4wd GM came up with a winner on this one. You'll need to pull the knuckle remove the wheel bearing and then you will be able remove the rotor from the ...
how to replace rear wheel seals remove the rear diff cover remove the rear brake drum/rotors rotate the rear driveshaft until you can see the bolt that holds the center pin slide out the center pin ...
...replace the rotor i have tried a porta power type system without success i do not want to bend anything this is a 2 wheel drive truck to get mine out I threaded the hub bolts almost all the way back ...
It only has 30,000 miles on it and the rear brakes squeal when applied when first driven cold. Does not do it after it has been driven and warmed up. brakes typically only last about mas 30k miles. ...
How do I get the rotor off for replacement with out destroying anything else in the process. Are we refering to the brake rotor? Jack the car up ,remove the wheel,remove the caliper bolts and slide ...
248 questions posted
Usually answered in minutes!
284 Questions
178 Questions
43 Questions
13 Questions
14 Questions