2004 GMC Envoy "mode door" Questions

Ad

...MODE DOOR MAKES KEEPS SNAPPING IN FULL A/C (PANEL) MODE Heater Mode, Bi-Level Mode, and Defrost Mode are fine but in full A/C Panel Mode or in AUTO when Temperature warms up and A/C is trying to ...

Ad

...mode actuator door. Sometimes the wirings and connectors can give problems. If the signals do not reach the actuator properly, the control sysytem will assume a default mode position, and air will ...

Ad

...mode door actuator. It is contains a small motor with gears that turns the mode door to the various positions. Those gears can strip and cause the noise you hear. It is fairly simple to look and feel ...

...mode door will stick some times. Usually this is the problem. The actuator motor will need to be removed and replaced...sometimes they can be recalibrated, but not often. Good luck, i hope this

Question about GMC Envoy

1 Answer

...mode door to the middle position. Attach the mode actuator to the HVAC module. Torque the screw to 17 in-lb (1.9 Nm). Connect the mode actuator connector. Install the left floor duct under the ...

...mode door to the HVAC module is inoperative (the door motor is working) How much will it cost for just the mode door part This is a common issue with GM products and luckily it is not all that ...

...the vents including defroster. Where should I start? The problem is most likely one or more of the mode control actuators or the doors that they drive. Sometimes the doors bind or else the actuator ...

...door actuator (right dashboard area) or the mode actuator( mid dashboard area). The fan outputs could be normally working, but is being muffled by the incorrect positioning of the HVAC doors, giving ...

Question about GMC Envoy

1 Answer

...battery was changed is that the HVAC system had to recalibrate itself. Sometimes this causes the mode control doors to stick or the mode control actuators to damage the gears for the doors. The ...

Question about GMC Envoy

1 Answer

...is one of the mode control actuators in the rear HVAC unit, it is trying to move the mode door but is meeting resistance. You can access that area by removing several screws and removing the

Not finding what you are looking for?
2004 GMC Envoy Logo

3,345 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,418 Questions

2006 GMC Envoy
2006 GMC Envoy

593 Questions

2005 GMC Envoy
2005 GMC Envoy

540 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...