2004 GMC Envoy "bad tie rod symptoms" Questions

Ad

...bad? drag link is the bar! between the tie rod ends and has connection to the pitman arm if it is bad the joint where it hooks to the steering box/ pitman arm will shake when you put your hand on it ...

Ad

Question about GMC Envoy

2 Answers

...bad tire or could it be a wheel bearing, ball joint or CV joint, or even the rack and pinion? How can I check it? Could be your tie rods coming out of the rack and pinion and attached to the wheels. ...

Ad

...bad tie rods. Locate the point where the tie rod end connects to the steering knuckle at the wheel. The tie rod end will have a rubber boot with a bolt going through with a nut and probably a cotter ...

...front end shakes real bad very good chance you will need tie rod ends, is there squeaking during turns? (ball joints) hit a bump at higher speeds and the car sways left and right? any other

...of the vehicle. But sometimes they do go bad but not usually at 80xxx miles. Please explain some of the symptoms you are having with your vehicle. It may be bushings tie rods or steering ...

Question about GMC Envoy

1 Answer

tie-rod end is not hard to replace, but there are a few tricks to use to avoid really messing up your front-end alignment. The ball-joints require more tools to replace them and they are heavier parts

Question about GMC Envoy

1 Answer

...caliper (pulls to side caliper is hanging on) alignment problem (bent or broken tie rod ends) car shakes or shimmy when brakes are applied usually is a bad or warped rotor. the possibility is

...bad on the wheel opposite the direction you turn it due to the action of centrifugal force. It could be ball joints/tie rods as well, but I'd start with an inspection of the wheel bearings. If the ...

Question about GMC Envoy

1 Answer

...Tie rods and struts seem fine. Sometimes when i turn the wheel or hit bumps while driving I still hear a clunking sound. Could one of my axles be bad? inner joints a plunging joints have problems ...

...tie rod bushing ? There are a number of different things that could cause that problem, a bad tire, a lower or upper control are bushing, a worn out inner or outer tire rod end l, a bad wheel bering. ...

Not finding what you are looking for?
2004 GMC Envoy Logo

3,345 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,418 Questions

2006 GMC Envoy
2006 GMC Envoy

593 Questions

2005 GMC Envoy
2005 GMC Envoy

540 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29492 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...