2004 GMC Canyon "fan blower work" Questions

Blower fan only works on 2? Blower fan only works on 2? I had a problem on my 2006 sierra, the fan wouldn't work on 5. gm had a curtisy recall, they had to replace a resistor, at no charge, last week.

Fan blower motor 2004 GMC Canyon 2.8L 4 cyl w/5speed. the 3 lowest settings on AC/Heater blower motor does not work. It only works on the highest setting. The Canyon has an inherint problem with the ...

...4 for the A/C and Heater. Is it a fuse or switch problem? It's your blower motor resister. It is located on or near the blower motor. This, when it goes bad, will cause your fan to only work on

...in the heater air ducting in the blower fan airflow. Check for loose connections and open circuit resistors on the unit. If speed 4 works always, its unlikely to be the blower motor ground

blower fan will not work on # 2 position At first, the blower stopped working on # 3 and worked on 1,2 & 4. Then I went and changed the resistor and now the blower does not work on # 2 but works ...

fan control only works on high in a gmc 2005 canyon Replace the blower motor resister,it is mounted right next to the blower motor,it has a lug with about 7 wires on it.Just unplug it and remove two ...

heater fan only works on high This is caused by a defective blower motor speed control resistor, the resisitor is located next to the blower motor.

...but does work on 4/hi this is only the fan/blower. what causes this& how do I fix it? replace blower motor resistor located near blowermotor I have the same problem... how much was it to

blower motor for interior fan only blows on high speed. All the lower settings dont work now The blower resistor pack needs to be replaced, it's common for the blower speed resistors to burn up and ...

...blower fan a good kick but further inspection showed connector heating up and blower works ok on high, blower motor ok.. will replace connector $50.00 could still be resistor issue??? Replaced ...