2003 GMC Sonoma Extended Cab "abs brake" Questions

Ad

...ABS and Brake Light are on and I have no abs but the brakes are extremely touchy If I slightly depress the brake I chirp the tires and usually slide. Sometimes on a clear day the ABS and Brake light ...

Ad

Question about GMC Sonoma

1 Answer

...ABS brake light stays on and I have only less than half the brake fluid flow at the rear By the sounds of it you need to bleed your brakes the ABS light should go out by itself if this is done unless ...

Ad

Question about GMC Sonoma

1 Answer

...brake sensor on a 2003 gmc sonoma zr2 On both the 2wd and 4wd sonoma models the abs sensor is on the front not the rear. The way an abs system functions the wheel speed sensor sends a signal to the ...

...in place also abs light sometimes comes on and off after changing hub assemblies and cleaning wheel speed sensors on both sides check brake fluid for the brake and for the abs might be a short ...

brake booster is gone ? 2001 gmc sonoma- cleaned abs thingys and where they mount in front hubs, replaced master cyl, brakes still fail- as i'm slowing down, brake pedal gets very hard, the same as it

Question about GMC Sonoma

1 Answer

...abs brake light is on...the other brake light is not on...the brake fluid is full...the manual says i can drive it if the one light is on....i am about 11km from the garage...should i get it ...

...is to purchase a vacuum bleeding kit. You don't say if you have an ABS brake system. If so, you may find this video helpful. Bleeding the ABS Brake Control Module On Chevy Using Snap On Solus Ultra

...not there and other times just operate on one side causing the car to pull very hard to one side. you can try and flush your old brake fluid out. does abs light come on? possible shorting in abs ...

brake lines on back i am not getting any fluid to rear wheels i tryed bleeding sys with help diconected abs sys to reset to defalt no abs light is on stumped a special tool is required to hold the ABS

Question about GMC Sonoma

2 Answers

...brake light is on if the abs light is on then you have a code in the system that needs to be checked and repaired. it could be a bad wheel sensor, poor connection, broken wire, dirt clogging the ...

Not finding what you are looking for?
2003 GMC Sonoma Extended Cab Logo

297 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Sonoma
1999 GMC Sonoma

403 Questions

1996 GMC Sonoma
1996 GMC Sonoma

359 Questions

1995 GMC Sonoma
1995 GMC Sonoma

270 Questions

1998 GMC Sonoma
1998 GMC Sonoma

269 Questions

1997 GMC Sonoma
1997 GMC Sonoma

249 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...