1999 GMC Sonoma "replacing door latch" Questions

...door. How do I go about replacing this piece of junk device? You should replace the handle with an aluminum version. The best one I have found is sold on eBay for 12 dollars. Look for the one sold by ...

door latch 2003 Sonoma TAKE DOOR PANEL OFF.... USE A 10 MILIMETER LONG SOCKET WITH LONG EXTENSION. TO REMOVE THE HANDLE FROM THE INSIDE OF DOOR.YOU WILL HAVE TO DICONNECT AND RODS THAT ARE ATTACHED TO

floor jack under the door for support while u remove hinges. There should be some adjustment at the hinges, and door latch to fine tune the fit and how it closes. Good luck, let me know how u make out

...replacing parts. Remove power door lock actuator (218A42). Disconnect the rods from the front door latch (21812). The front door latch remote control link (21940) and the latch-to-lock cylinder rod ...

...replacing parts. Remove power door lock actuator (218A42). Disconnect the rods from the front door latch (21812) . The front door latch remote control link (21940) and the latch-to-lock cylinder rod ...

...door latch is just flopping up and down no resistance latch spring broken and will need to replace ===== Look at the latch on the end of the door and make sure that the latch is open.You will want to ...

...door latch is not latched? I need some help before I wreck the door!!!! Thanks, Kris If the door won't open from either the inside or outside than there is a problem with the latch assembly or ...

When it's cold out my doors won't stay closed I have to hold the handle up & repeatedly slam the door lubricate all door latches and hinges (GENEROUSLY) with WD 40, repeatedly open and close doors ...

...latch not engaged and door lines up but won't stay latched shut.... The latch may already be latched like it is closed. You can take a screw driver and put it.. where the latch engages Slightly pry ...

...door latch can you replace a door latch mechanism at home on a 1996 jeep grand cherokee? I got another latch out of another used door Yes, it would involve removing the door panel, disconnecting the ...