1999 GMC Sonoma "hand brake sticking back wheel" Questions

it will be tough to release it.. calls for 2 hands to pull up and push the button at the same time..foot brake requires pushing down while pulling the hand release and see if it works.. repost please.

...hand brake stuck 2001 toyota coralla manual dash show me hand brake warning light and car no power There are several things that can make a hand brake stick on. It possible the cable attached to the ...

...brake booster servo operated by vacuum with disc brakes on the front wheels and drum brakes on the rear wheels. A hard pedal signifies a problem with the booster or a leak in the vacuum line. Brakes ...

...the parking brake? Or Wheel bearings? check dust debris cover and rotor ====pads not sticking ==ebrake /parking brake maybe scraping the protective shield on the brake disc, just bend it back by ...

...hand if it will not turn take a wrench and crack open the brake link going to the caliper and see if the wheel turns. If it still will not turn then you need a caliper. BUT, if it does turn then you ...

...freed up long enough to do this. So far the passenger side rear wheel is working. Could be rear brake locking up,cars arent used to going backwards or hand brake sticking on . Would look there

...hand brake off and in nutral and turn the rear wheels if they turn easy pump the brakes and try again if there is either 1 or both sides sticking remove rear wheels and check out but unless you know ...

...brake disc while turning, you can bend them back out but on the most part when they are this bad they just fall off in your hand, it is only thin metal, may be tricking to see you will have to stick ...

hand-just do not touch the metal or you will get burned. Look at the brake disk for evidence of the outline of the brake pad that may have transferred to it indicating a very hot brake disk. Chock the

...brake pad life, and fewer complications. Possibly the hand brakes dragging. With a normal handbrake, you can remove some screws around the handbrake covering. The screws are sometimes well hidden so ...