1999 GMC Sierra "engine makes ticking noise cold" Questions

...ticking noise as the crank goes around.. i dont think im going to throw a rod but i was thinking it could have something to do with the main bearing or the rod cap... anyone have a possible awnser... ...

...ticking with engine cold or hot , or both is dip stick level at top and fresh and clean? can be the engine, or things bolted to it, find a mech to listen with his stethoscope and find LOCATION ...

makes a ticking noise when it is cold but when it is warm the ticking noise goes away what would cuase this? Usually a ticking from the engine is caused by oil not coating the tappets. Tappets are the

...engine makes a ticking noise like a valve tick , is it normal , or the normal fuel pump noise? This noise is caused by the belt tensioner pulley - solution is to replace the assembly. If the noise is ...

...ticking noise that seems to go away once it warms up. I have no loss of engine power or anything associated with it. Although today when I started it to warm up the check engine light was flashing ...

...engine warms up the oil get thinner so if you have a lifter or a rocker that is warren out and ticking it will make a noise louder hot then when it's cold. When the oil is cold it acts like a cussion ...

...Makes a ticking sound until the engine warms up. ... If I put the truck in park and rev the engine, it doesn't make the ticking noise, but if I put it in ... Even doing an inspection on my truck ...

...ticking noise (not loud) when engine is under slight acceleration between 1500- 2000 rpm. The noise decreases as the engine warms up but doesn't go away until it is completely warm ie 5-10 min i hav ...

ticking noise when the engine is on. Cold, warm, hot, drive, neutral, park- the noise is the same...help-o! It needs a valve adjustment. I am guessing about $150. A pain on the Subaru because you have

...ticking goes away after engine warms up and the hydraulic lifter(s) had time to pump up. Make sure that you don't have a exhaust manifold leaking as well due to a crack or a failing exhaust manifold ...