Question about GMC Sierra
...distributor shaft down to the oil pump. This is turned when the distributor shaft is turned by the meshing gears on the camshaft and distributor shaft. I would say that you are probably going to have ...
distributor and shine the light in the hole you should see a slotted shaft in the center of the hole way down in the engine. Compare it to the bottom of the distributor and you will see the drive slot
...distributor one tooth at a time. Usually the oil pump shaft will follow it if you only more one at at time. If you set the engine at tdc, there is a mark on the distributor that you line up that is ...
this tower. It takes a few trys so don't give up. You may need to use a long screw driver to turn the oil pump shaft to match the tab on end of distributor shaft. air will blow finger off the hole
Question about GMC Sierra
...distributor installed correctly in 1994 gmc 1500 has a 350 in it? if you didnot mark rotor orientation before removing pyt engine on top dead center # 1 cyl line roter up to #1 plugwire post on dist ...
distributor cap base (the shaft that goes down into the oil pump) one of the ''ears'' that are threaded for the distributor cap was broke and I had to fix that. So I then had to remove the distributor
...shaft on the distributor by raiseing it above your head notice what positon it is at 1 oclcok 6 oclock or what ever the postion, now go back tothe block and turn the shaft in that direction so it ...
Question about GMC Sierra
...distributor shaft slot on a new one won't go down the oil pump shaft what do u do when the distributor shaft slot on a new one won't go down the oil pump shaft Reach in there with a long ...
Question about GMC Sierra
...shaft the distributor sets on check your gauge if an electric one if a hydraulic gauge the check your oil line from the block to the instrument cluster gauges have been found faulty get a hydraulic ...
because it won't set in place and I can't move the oil shaft it driving me nuts. if you cant turn the pump shaft chances are your pump is locked up and needs replaced, why did you pull the distributor
942 questions posted
Usually answered in minutes!
987 Questions
847 Questions
676 Questions
604 Questions
457 Questions