4x4 still not working I have a 99 GMC Sierra and it wouldn't shift into 4 wheel drive. I replaced the actuator and still will not shift into 4x4. What would be the problem? you could have problems in ...
...99 GMC Sierra 4x4 with a torn up transfer case. (stuck in 4lo) Is there a way to make it two wheel drive for now so I can drive it (take something off or apart?) PLEASE HELP! if the only problem was ...
...radio There is a cylanoid on the starter that may be causing the problem. My 99 Sierra 4x4 did the same thing. I replaced the starter at the same time. Just easier and only way I could find it
...doesn't turn on (fuse?) 99 gmc sierra 4x4 when's the last time you pushed the button? with engine off see if you can turn the front of the compressor. if it moves then backprobe with a test
...99 gmc seirra 4x4 the ignition will not turn over, the hole at the end of the tumbleris not lineingup to pull it out.. have power when key slids nin, has the beeping sounds but will not turn over.... ...
...99 gmc 4x4, truck is mechanicly taken care of, problem is if i trump on the gas the truck will hesitate, motor sounds muffled, pinging noise like bad gas, shifting is held back. If I ease into to it, ...
99 sierra push button 4x4..to check the controller motor you can take it out of the side of the transfer case and using a 12v source check it on your own to see if that is what it is. You can also use
4x4 , is not working DRL (day running lights) , I check the fuses , new bulbes , dos not work Thanks 1996-99 GM trucks.There is a diode, located under the dash between the steering wheel and the radio
Does a 99 GMC Sierra 4x4 need to have the front wheel bearings packed? NO.
99 GMC Sierra 4X4 kicks out I have 99 GMC Sierra with the 5.3L and push button 4x4. The 4wd does actully work, tested in 4H and 4L. The problem is that when it is in Auto 4WD or 4H it will work until ...
942 questions posted
Usually answered in minutes!
987 Questions
847 Questions
676 Questions
604 Questions
457 Questions