1999 GMC Jimmy "remove heater door" Questions

...Remove the heater and/or air conditioning control assembly. Remove the radio and the storage compartment assembly (if equipped). If necessary, remove the instrument cluster. Unfasten the left and ...

...heater core. To see the blend door moving, remove the panel that says "Cut here for service" under the hood along the firewall. I have a 99 Bravada where the blend door keeps moving back and forth ...

door and blowing the mess of the heater core,I replace the thermostats.Still no heat turns out there was a small amount of debris collecting in the fitting for the inlet hose at the thermostat housing

...heater problem The blend door keeps cycling from hot to cold no matter what setting it is on. Went to auto wreakers and tried a new control switch assembly no luck. please help if the blend air door ...

...heater core is clogged remove hose and flush both ways with low garden hose pressure Good Evening, I am assuming you have the automatic climate control. Behind your glovebox and on top to the left ...

heater floor door dosnt open is it vacuam or electrial and how do i fix it 2000 gmc jimmy With the key in the off position; remove the RDO BAT fuse for at least 10 seconds then replace the fuse; turn ...

...remove the heater core in the engine compartment there are two bolts and one nut. The nut is right next to the hoses that go to the heater core. One bolt is just to the left of the distributor below ...

...Remove the heater and/or air conditioning control assembly. Remove the radio and the storage compartment assembly (if equipped). If necessary, remove the instrument cluster. Unfasten the left and ...

Replace heater door control part # 52474810 on the fire wall on the pasenger side, i belive u have to remove the heater motor to gain access to the door

...heater hoses going into the firewall. Remove the output hose(bottom)and start the engine to see if water comes out of the heater core. If it does, it is a stuck blend door inside the duct work of the ...