1999 GMC Jimmy "bolt hard undo" Questions

Ad

...hard. You just need to take your time and a very large pan. Your filter is just in side the trans pan. The pan will have to be dropped. A ratchet and socket will make short work of it. Just undo the ...

Ad

...both hands and left and right very hard. its hard on the fingers but you will do it. put some copper greese on the bolt and a little on the ball sockets. dont be scared of breaking it pull real

Ad

Question about GMC Jimmy

1 Answer

...bolt hard to get at, but with a small ratchet it can be done easily. pull cove off and there will be the core. One or 2 bolts takes it out. When you put heater box cover back on, make sure it seats ...

Question about GMC Jimmy

1 Answer

...bolt and hit it hard a few times and it should start to move ,,, When it starts to move undo 1/2 turn then 1/2 do it up and keep doing it a bit more each time till it comes a lot easyer when about 3 ...

...hard to push and almost impossible to brake. a hissing sound like a air leak comes from the booster. undo the the vacuum hoses and make sure you make a diagram of where each hose goes. move them out ...

...hard? cardenderek, This info is totally bogus.You obviousely have never changed a water pump on a 6.6 liter Duramax Diesel engine.1st off it isnt belt driven it is gear driven from the drive train ...

...bolt? on the starter or the block? a block can be welded with a cast iron rod..its hard to do and sometimes may not hold long..the aluminum nose on the starter can be changed out by undoing the two ...

Question about GMC Jimmy

1 Answer

...hard job only two bolts hold it on but you will need a high lift jack or a four poster ramp ,drop the starter then undo teh main cable ,also fit the big thick cable first as its impossible to get to ...

hard to replace it? Usually pretty easy apart from the fact you are doing it under the vehicle. From ones I have done. Undo the hydraulic pipe, undo the bolts on the slave cylinder and remove it. Bolt

...the tank empty,,,,,undo the hoses on the fuel pump and remove wire harness off the fuel pump ... then turn to the right just a bit and pull towards the back..not very hard to do just can be a

Not finding what you are looking for?
1999 GMC Jimmy Logo

1,586 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

1996 GMC Jimmy
1996 GMC Jimmy

768 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29492 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...