how to replace an intake manifold gasket on a 1996 gmc jimmy Hello, Here is a detailed summary on the procedure of how to replace the intake manifold gasket on a 1996 gmc jimmy; REMOVING THE UPPER ...
99 jimmy coolent leak near trans bell housing It is probably either an intake manifold gasket or a rear engine freeze plug. If it is a freeze plug, the transmission will have to be removed to fix it ...
...which tells me I have bad head gaskets. I was told by a mechanic that it could just be the intake manifold and not the head gasket. Is this possible and how do I find out if it's just one or the ...
...I'm assuming you have the 4.3 liter engine in it. It should be in the front of your intake manifold. Follow you upper radiator hose from your radiator to the intake manifold. Where it ...
...tell me where it is located on the motor It's on your fuel injection rail BELOW the upper intake manifold. The upper intake manifold MUST come off first. ...
i'm trying to remove the starter and want to know if i need to remove the exhaust manifold too No, you do not need to remove the exhaust manifold. The starter can be removed without going that route.
have to replace my oxygen scnsor in my 1999 jimmy SLS GMC...where is it located at so i can do it myslef...thanks Marty on exhaust manifold or on exhaust pipe,(Y-pipe), after manifold
...can any one tell me where the EGR VALVE is Under hood, center, upper engine area, front of intake manifold, passenger side of water outlet, mounted in intake ...
...2000 GMG Jimmy V-6 4.3l Its located under the base of theromastat in the front of the engine intake manifold left of the EGR valve where the upper radiator hose fitting is bolted to the intake ...
I HAVE ANTIFREEZE LEAKING OUT OF MY INTAKE MANIFOLD ON MY 1987 GMC JIMMY I had this happen to me the first time I replaced my intake manifold gaskets. It was hard to install the intake and gasket ...
1,074 questions posted
Usually answered in minutes!
1,363 Questions
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions