1996 GMC Jimmy "heat shield starter" Questions

Ad

...heat shield. On the 2.2L engine, remove the brace rod from the front of the engine and the bell housing. On 2.2L engines, remove the drivers side wheel to access the starter motor wires and the ...

Ad

...wheel, the skid plate, and the starter heat shield. 2 wheel drive, you also have to remove the front exhaust pipe from the manifold. If you need to know more, let me know, and i'll see what it

Ad

...heat shield on the starter of 85 bronco 85 ford bronco 5.0 engine. Katrina victim sat in water unknown time Drove vehicle to town yesterday, would not restart, dx need starter, when I removed the old ...

heat shield on 2000 Passat 4cyl Turbo I am replacing the starter in my 2000 Passat 4cyl Turbo. I checked out a Hayes repair manual from my local library. It has been somewhat helpful, but it is really

...heat shield clamp View of the starter motor with the heat shield removed while looking over the crossmember - Removing the starter motor mounting stud nut where the air pump tube bracket is also ...

Heat shield Starter To install: Install or connect the following: Starter Wires. Torque battery wire nut to 89 inch lbs. (10 Nm), and ignition nut to 18 inch lbs. (2 Nm). Heat shield. Torque the bolts

Question about GMC Jimmy

1 Answer

...heat, sometimes they get so hot they seize from the metal expanding. The starter should have a sheet metal shield on the top to prevent this, chances are it's either rusted off or the starter has ...

...heat shield ?? How can I fix this ? An older starter will sometimes fail to turn over when hot because the armature bushing expand and are too tight for the armature to spin. At this point it is time ...

...holding in the starter on 98 Olds 88, a plastic shield is blocking access to 3rd bolt. It`s a heat shield,there should be plastic caps covering the screws to remove that to reach the

Question about GMC Jimmy

1 Answer

...heat shield thats supposed to be on my 1991 ford f150 v8 5.oL truck. the starter keeps overheating and i need to see if shield is on. your truck did'nt come with a heat sheild.you either need new ...

Not finding what you are looking for?
1996 GMC Jimmy Logo

1,074 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...