1996 GMC Jimmy "cylinder misfire" Questions

...misfire on cylinder 3. Misfire on cylinder number three. Did you change this plug. It is hard to get to, the steering shaft is right in the way. Or you might have cracked the plug installing it. Also ...

...light blink it is only one thing.......misfire you could have P0300,P0301 and so on P0300 is multiple misfire P0301 is cylinder no 1 misfire,the last number tell you the no cylinder hope it ...

misfire in number 4 cylinder in 1998 jimmy misfire in number 4 cylinder in 1998 replaced lifters and sparkplugs replace the cap and rotor button, if that doesn't fix it then you need to replace the ...

severeal cylinders misfire 1997 Chev 1/2 ton 4x4 several cylinders misfire runs rough, but clears up. Idle speed is very fast, also Sounds like the TPS (throttle position sensor) usually located where

...misfire, to find out which cylinder is the one have the computer fault codes read/checked by a Kragen or Autozone parts store it is free, the last number in the fault code is the cylinder that is ...

my cylinder is misfiring on my 2000 gmc jimmy the cylinder is misfiring and check engine light is on. i just changed the oil filter. replace fuel filter, air filter, spark plugs, wires, distributor ...

...or does the misfire move to all cylinder. start with checking and maybe replacing the cap, rotor and wires and then see if it acts up. also take a look at the coil. good luck and have a good

...Cylinder Misfire Detected This is sometimes a symptom to a clogged fuel filter or fuel line. When was the last time the fuel filter was changed? There are a lot of problems that can lead to a random ...

cylinder 6 misfire. code P0306 1999 gmc jimmy, still have 150 pounds of pressure coming out. Compression is not the issue The OBD2 Code ,indicates you have a misfire on cylinder #6 (PO306)

...speed and teach jumps erratically What is a "teach" That said you have an engine misfire, have the engine control system scanned, it will give a code showing what cylinder or cylinders are