need to install a timing belt on a 2002 ford focus with a 2 liter zetec engine cant find the timing marks No marks to align camshafts, set crankshaft at TDC, align camshaft as shown, to align, lobs on
...smooths out. The cam shaft on the exhaust with varibal timing gear is out of alignment with the cam lobs on the exhaust stroke on #1. Both the exhaust cam and intake cam have a dot between the front ...
Question about Ford Cars & Trucks
I want to set the timing for ford focus Zetec se 1.6 2003. I need to know where the crank can be locked for TDC, and also I need to know whether piston Number 1 camshaft lobs faces outward or inward. ...
timing diagram for mazda tribute 4 cylinder You will have to remove the valve cover to align cam's, the lobs to cylinder number one should point out at 45 deg, and set crank at TDC.Hope this helps you
Where are the oxygen sensors located lob a 1989 Ford crown Victoria on the exhaust manifolds before and after the cat converter.
...may need adjusted,plugs may need changed firing order could be wrong or possibly a worn lob on the cam ...
engine won't running after replaced head gasket did you change the timing belt ..when the head gaskets are replaced ,,the vehicle got so hot it stretched it out of time ..It is mainly a strong rubber ...
...balancer. You will need a balancer puller for a 3.8 and a crank sensor alignment tool to do this
Engines can i change to smallest engine, i have at 3.3 in a 1998 caravan The engines computer and ALL wiring is totally different. I suggest if you plan on doing this buy a wrecked running one and ...
Question about GMC Cars & Trucks
Got a 1984 gmc jimmy full size carburated that keeps backfiring through carb new carb new distributer cap rotor plugs wires new fuel pump timings dead on what is the problem Backfire through carb The ...
1,815 questions posted
Usually answered in minutes!
3,749 Questions
2,612 Questions
2,055 Questions
897 Questions
840 Questions