2004 Ford Mustang "belt tensioner" Questions

...belt and the tensioner moves to follow the belt movement. There is no noise or squeeling when the engine is idle or at higer revs as long as no repid acceleration of the engine occurs. The belt also ...

tensioner is under the belt remove the belt first and then you remove the tensioner and after you install the tensioner use the tensioner to reinstall the belt be sure to take off the negative side of

...tensioner and put the belt over the altenator pully. Double check to make sure the belt is riding correctly on all the pullies before starting. Crank the engine over several times before starting to ...

...tensioner away from the belt. I have also seen tensioners that have a little square block sticking out of the spring housing, putting an adjustable wrench on the block will allow you to pry the ...

...on my 1996 ford mustang? Take tension off the tensioner and take belt off. You put wrench on the bolt that holds the pully on and pull - tension will come off the tensioner and you remove the

...it will show you where to look for the arrow that tells you between this mark and that mark is the right tension. if its not in that area, then you need a new belt. the tensioner pulley keeps it ...

I bought a 67 Mustang 200ci today and popped the belt on the way home. I replaced the belt but found no legit way to properly tension it, any suggestions? It squeaks like crazy Belt tension is ...

serpentine belt I need to put the belt on because i had to replace the altenator and now i just dont know how to do it without destroying the belt. think you could help? relax belt tension regulator, ...

things are a tight fit and sharp. It is a nasty job that should be easy and years ago on cars was There is a belt tensioner that is spring loaded that has to be pulled up in order to install your belt

2002 ford mustang 3.8 v6 loosening the belt locating and loosening the belt tensioner belt tensioner is a self adjuster