replacing the alternator drive belt + idler pulley + drive belt idler pulley. car was driven, then sat for a few hours and did not want to start. it did turn over, but was losing power quickly and did
Question about Ford Mustang
drive belt. Is it engine speed related? If so what can you hear under the hood when you rev up? If its not too difficult can you run the engine for a minute without the belt fitted. Don't run for long
...alternator faulty.make sure drive belt not damaged or loose and belt tensioner working correctly keep tension on drive belt.if you have digital voltmeter you can check battery and alternator
Question about Ford Mustang
My 2005 mustang squeals on start-up and when the a/c is on. Serpentine belt was recently replaced. Any ideas of what could be happening? I recently got the serpentine belt on my 2005 v6 mustang ...
...drive (FEAD) belt tensioner 28620FEAD belt 3-Generator electrical connector (part of 12B637) 4W705790Generator B+ terminal nut 5-Generator B+ terminal (part of 14B060) 6W520414Generator stud nut ...
need to replace alternator, what tools are needed for belt tensioner for the alt itself youll need a 9/16 and a 5/8 socket, for the belt tensioner you need a 3/8 drive rachet or breaker bar
Question about Ford Mustang
belt squeaking causing motor to die on a 2002 ford mustang v-6 the belt squeaking on a 2002 ford mustang v-6 causes the motor to die while driving the car. I would bet that there is a pully on one of ...
...drive ratchet. Determine what size yours is and insert it into the square hole on the tensioner arm to loosen the tension on the serpentine belt to temporarily and partially remove it in order to ...
...drive to pull all the tension off the tension pulley assy and hold it there while you put the belt on. Please wear arm protector sleeves or a sweat shirt because things are a tight fit and sharp. It ...
drive breaker bar on the belt tensioner, just insert into the square slot on the tensioner and rotate it clockwise. Remove the power wire and the harness Remove the mounting bolts 1 under and 2 on the
594 questions posted
Usually answered in minutes!
706 Questions
694 Questions
653 Questions
589 Questions
617 Questions