2003 Ford Mustang "car door closing" Questions

window broke and now door won't shut I closed the driver door of 2000 mustang convertible and the window shattered. I opened the door after that and now it won't close. I cleaned the glass out of door

door then I would suspect a switch. If the problem is with both doors then I would suspect a computer glitch. Either way I would reccommend taking the vehicle back to the dealer to have it checked out

How do I close the vents on my 1965 Mustang? there is a lever to allow you to do this On the driver's side, there is a black knob at the end of a rod beneath the dash close to the driver's door, that ...

the drivers side door on my 93 mustang is not fitting right making it hard to close and open the door. I have to lift it to open or close check the door hinge pins and make sure they are fully seated.

...closing the drives side door the dome lights go on but it requires several closings to get them to go off. I can't find the switch in the door. The switch is built into the latch mechanism, you have ...

...car says "Door Ajar / Open" (Idk if you have a screen on the dash) or shows the door open symbol / light, then its a problem with the switch. If it doesn't say its open, then it is a wiring problem ...

...door frame. I got a jump and drove the car home and tried to crank it again and the same thing happened. I went and got a battery as my battery was dead. We replaced the battery but I am still having ...

what color are the wires that go from door switch to dome lights on a 2005 mustang v6 conv. The door switch doesn't go to the dome lights , the switch (door ajar switch ) is an input to the SMJ - ...

the buzzer that shuts off when u shut the door isnt turning the buzzer off when he shuts the door how does he fix it its a 1996 mustang when the door closes it contacts a switch on the pillar between ...

...Car is out of warranty. This is a common problem with power windows. Everytime the driver's door is opened and closed the wires in the harness between the kick panel and door frame get bent back ...