...torx bit for your caliper bolt.a size t50 if I am thinking right. use a good one as these can be hard to get broke loose.as far as rotors remove cliper slide bracket with an 18mm two bolts and rotor ...
for the size of the torx bit required to remove the front caliper bolts. they are not regular bolts for a regular socket. Depending on what make and model the vehicle is it most likely a T-55 torx bit
...size tool i need to take caliper bolts off on the front of a 2002 chevrolet 1500 4x4?? Sometimes they use a T-50 torx bit, and sometimes they use either a 15mm or 18mm bolt, however the caliper ...
what size torx bit do i need to remove the screw from 90 olds 88 caliper to change the brake pads? if its the front you want to change,its a t60 torx,hope this helps
...torx bolts holding the caliper to the bracket remove them using the proper size bit remove the caliper by prying it away from the bracket remove the pads by pulling strait out remove the two bolts ...
...size up x0 torx, I decided to consult an expert. After going to the service department of my local dealership and talking to some of the older and more knowledgeable guys, we determined that the ...
I need to know what size and what kind of wrench to use on bolts that holds brake calipers on.Thanks alot If I remember correctly it is a T40 torx bit to remove the pins.
torx has 6 points and the hex only has 5. easy to confuse the 2 in poor light or really dirty conditions. make sure to use the correct size of the correct tool before applying any force to the tool or
...size star bit do I need to remove the brake caliper? The one that fits. You buy a set for 20 bucks! They are called Torx. ...
...size allen wrench to remove front brake caliper i just changed my front rotors and pads on my 2001 escape, 6 cylinder. everyone was wrong on the wrench sizes, including the idiots at my local ford ...
1,453 questions posted
Usually answered in minutes!
1,139 Questions
1,083 Questions
1,107 Questions
559 Questions
486 Questions
