2002 Ford F250 Super Duty SuperCab "replace rear axle diff" Questions

Ad

...replace the "vacum" created by the dropping temp of the oil. Its probably the vent for the rear differential. At the top of the diff right near the top there should be a plastic fitting the line ...

Ad

Question about Ford F-250

1 Answer

...alot of force to turn one of the tires.... inspect the clutches or replace the fluid and retest....simple way to check the rear bearings is to remove the axle and spin the wheel and ...

Ad

Question about Ford F-250

1 Answer

...replace the pinion nut. check your rear diff vent if pluged clean it out and clean up the pinion seal.sometimes if the leak is caused by pluged vent and has not been leaking long once vent is clean ...

on and when i take off it feels like the transfercase is in! front axle is just not engaging! any help on the next place to look? Check drive shafts are not damaged.if there ok you have a diff problem

...replace the u-joints. Just because they turn freely doesn't always mean they aren't shot. Does it stop immediatly when you let of the gas? Then it is u-joints. If it continues for a few seconds till ...

...replace the rear axle seal on a 1992 buick roadmaster remove the wheel and brake drum then remove rear diff. cover put transmission in neutral roll rear diff. around until you see an 8 mm bolt , ...

Question about Ford F-250

1 Answer

...rear axle to replace outer seal. Thanks if you are talking about the axle seals, 1.REMOVE THE WHEELS.2. REMOVE THE DIFF COVER(slowly)3.REMOVE THE BRAKE CALIPER ASSEMBLY.4.REMOVE THE 8MM PIN IN THE ...

Replace rear axle seal on a 2WD 1996 Silverado. I have an oil leak dripping onto the iside of me left rear tire. first drain fluid and remove diff cover take off tires theres a c-clip in the diff that

Question about Ford F-250

1 Answer

Replace rear wheel bearing first remothe the diff cover and drain, find the bolt that retains diff gears and remove then remove pin holding the diff gears, at this point do not rotate any part at all,

Rear axle 02 escalade need to remove to replace dust shield -chalk the wheels so the vehicle can not roll. -Place the transmission in nuetral. -jack up the rear of the vehicle. -remove the real wheels

Not finding what you are looking for?
2002 Ford F250 Super Duty SuperCab Logo

1,473 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...