intermediate axle shaft I'm trying to remove the alernator in my car, but I'm stuck on removing the right intermediate axle shaft. It's a 2003 Ford Escape. i can only guess it is a 3.0l 4v well as far
...Intermediate Axle Shaft Bearing I have a grinding/rubbing noise coming from the right-front of my 2001 Ford Escape V6. I believe I've narrowed it down to the carrier bearing on the intermediate axle ...
REMOVE THE RIGHT SIDE INTERMEDIATE AXLE SHAFT. REMOVE RIGHT SPLASH SHIELD AND RETAINERS REMOVE DRIVE BELT THEN REMOVE THE ALTERNATOR.WHEN INSTALLING NEW ALTERNATOR TORQUE ALTERNATOR BOLTS TO 35 FT LBS
...axle and intermediate axle, directly below the yellow transmission fluid dipstick. No need to mess with it. Change your trans. fluid at the regular specified mileage. If the fluid on the dipstick is ...
...intermediate axle shaft Right side splash shield and retainers Drive belt Alternator electrical connectors Alternator. Torque the mounting and adjusting bolts to 35 ft. lbs. (48Nm). Fig. Alternator ...
...axle is removed by two nuts on the intermediate shaft bearing. Pull out axle. Remove alternator and bracket. Here is the tricky part: the alternator comes out through the hole where the axle was. I ...
...under the car and place ratchet through the exhaust manifold area You need to remove the splash shield, and the RH intermediate axle shaft. If you still have trouble, unbolt the mounting bracket
...intermediate axle shaft. Remove the right lower splash shield screws and the pin-type retainer. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt. Remove the nut ...
...intermediate axle shaft. For additional information, refer toSection 205-04. Remove the right lower splash shield screws and the pin-type retainer. Rotate the accessory drive belt tensioner clockwise ...
1,840 questions posted
Usually answered in minutes!
1,083 Questions
1,107 Questions
900 Questions
559 Questions
486 Questions