My 2001 mustangs headlights sometimes flash on and off.what could it be?? ford head light switches incorporate a form of a circuit breaker, and commonly when they get a lot use or dust built up they ...
...breakers not contained in the panels are shown in the following chart. Circuit Circuit Protection and Rating Location Headlamps and High Beam Indicator 20 Amp. CB Integral with Lighting Switch Heated ...
Question about Cars & Trucks
I can't find the fuse on the high beam or low beam on this 1984 lincoln town car....or the circuit breaker My high beams don't work The circuit breaker for the headlights is inside the ...
low beams work but high beams dont. 1985 ram. one high beam didnt work. replaced and everything ok for about a month. now neither high beam works. understand there is a circuit breaker but where is it
Question about Cars & Trucks
Using high beams on 1997 Dodge B250 van causes lights to go out. When using high beams all lights will go out. The time it takes to go out will vary. Switching back to low beams, they will go back on.
Sometimes my headlights go out, it seems to be when I use my high beams Firstly check to see if when you are engaging high beam that you arenot knocking the headlight switch as well. Your lights are ...
I cannot figure out why my headlights(lowbeams) do not come on. My high beams do work. This may sound kind of silly but usually the main reason I find that both low beams don't come on is that they ...
2003 GMC Drivers side head lamp The low beam does not work but the High beams do, I changed the bulbs, no change. Is there a fuse or ciuruit breaker for each lamp Yes there is. There is a high beam ...
...to the headlights and check the bulb sockets for corrosion. The headlights are made so that the low beam and high beam are separate and they are not on at the same time. If both filaments were on at ...
Question about Jeep Cars & Trucks
beam works. How can I solve n fix problem??? Check the wiring on that light. Also check the bulb with a couple of wires to the battery, or swap the bulb left to right to make sure the new bulb is okay
969 questions posted
Usually answered in minutes!
706 Questions
694 Questions
589 Questions
617 Questions
433 Questions