2000 Ford Mustang "four letter starting" Questions

troubleshooting anti- theft system. Light flashes continuously and cannot start vehicle. checked with tester. It brings up code PO1206. Code is incorrect. It should be a letter and four numerals

...the engine revs to 1500 rev. put you foot on the brake again and it deaccelrates? why? What are the fault codes you have in memory, they will start with the letter "P" followed by four

wants to start but wont 3.0L Cars either start or they don't, so no such thing as wants to start in my experiences. The codes would be like this example P1200, the letter "P" and four numbers after it

were is the serail# located on a Grove AMZ 50 manlift The serial number is attached to the metal plate to the right of theprinthead holder.It start with four letters and ends with five numbers

emission circuit or just emissions Check engine light? Your code reader should display a coder starts with the letter P followed by four numbers. Example P0442. Post the codes and ill be happy to help

...or pump. Possibly a sharp bend (FIXYA won't let me say a four letter word that starts and ends with "K" and has "IN" in the middle as it's considered profane.), in the fuel line. Good luck. Jeff

...four letter word that starts with the letter F and ends with D (HEHE).Your second ploblem with it shutting off while your driving is stange.Could be anything.Clogged fuel filter,bad gas,fuel ...

abs and traction control lights just randomly came on. Unfortunately the code reader you used is spitting out garbage. Proper codes will start with a letter followed by four numbers. P0102 for example

on . It reads code 306 . What is the meaning of code 306 ? have to take to dealer its a security code for the anti theft system i think because all other codes are four digit letter codes on 99 models

...letter followed by four numbers. The often start with a 'P' ( it can also be a B,C or a U). If you post the DTC in the comments section below I'll try to help you work out what the problem is it is ...