2000 Ford Focus "wrist pin noise" Questions

Ad

...fluids. The funny thing is once I run the car so that the temp gauge goes to normal it stops making that noise and idles normal? Any ideas... soiunds like a wrist pin but more like a cracked

Ad

wrist pin knock. The wrist pin connects the rod to the piston. The remedy is to replace the wrist pins and if the wear is extreme the piston and/or rod may need replacing. This work requires an engine

Ad

...WRIST PIN SLAP: This can not be detected by shorting out the cylinder plugs. Rapidly accelerate and decelerate the engine speed. The engine will pass through a certain speed range when the wrist pin ...

Question about Cars & Trucks

1 Answer

...WRIST PIN SLAP: This can not be detected by shorting out the cylinder plugs. Rapidly accelerate and decelerate the engine speed. The engine will pass through a certain speed range when the wrist pin ...

Question about Nissan Cars & Trucks

1 Answer

...WRIST PIN SLAP: This can not be detected by shorting out the cylinder plugs. Rapidly accelerate and decelerate the engine speed. The engine will pass through a certain speed range when the wrist pin ...

...wrist pin knock. Get a second opinion! A wrist pin is, as has been said before, what connects the piston to the connecting rod, and it is difficult to diagnose. There are several other things that ...

...wrist pin and how is the easiest way to tell if it is the wrist pin short out each plug on at a time, if the noise changes on any cyl that is the one with a problem, if none change look at the knock ...

Question about Ford Focus

2 Answers

...wrist pin noise! Replaced the enging and trans, found a new Engine thru Trans, with everything on it for $4300, sold the old one (with the noise) on e-bay, for $4300 plus shipping. The drivetrain now ...

...WRIST PIN SLAP: This can not be detected by shorting out the cylinder plugs. Rapidly accelerate and decelerate the engine speed. The engine will pass through a certain speed range when the wrist pin ...

...this noise due to pre ignition? Should I pull the piston and check wrist pin? Bearing is good at the crank. YES SOUNDS LIKE A FAILED WRIST PIN, PISTON SLAP IS MOVEMENT OF PISTON INSIDE OF ...

Not finding what you are looking for?
2000 Ford Focus Logo

5,166 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2003 Ford Focus
2003 Ford Focus

2,055 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2004 Ford Focus
2004 Ford Focus

897 Questions

2006 Ford Focus
2006 Ford Focus

840 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...