2000 Ford Focus "test house compressor fuses" Questions

...compressor is engaging but it is not throwing air out of the vents.... I checked the fuses but dont know how to get to the fan what should we do next? The blower motor is located under the passenger ...

...test by swapping the relay in the fuse box with a similar one. The expansion valve is closing up,it needs to be replaced,the expansion valve is closing up,and causing the evaporator to freeze up. The ...

...test as with the air compressor. If you are not in a shop with the proper tools to fill the shocks with air with the vehicle off, you will need to do this while the car is running. Quick tip the air ...

...compressor is running the fan may not always run, There is a quick test for the fan circuit, disconnect the fan sensor at the thermostat housing, the fan should come on, this is failure mode, so if ...

...test them: Locate the relay in question. They are all numbered, rated , etc. You can swap like numbered relays to see if that's the problem. In addition, some cars use a BCM or ECM to control AC ...

...compressor to come on while pushing down on the rear bumper. If it does not come on, test the switch terminals for power, using a circuit tester. If one terminal has power and the other does not, ...

...compressor assembly. Circuitry. Air suspension relay. Go To Pinpoint Test P . ---------------------------------------------------------------------------- The system consists of unique rear air ...

test each individual hot wire, if you find a faulty wire see if you can manually fix it, if not then run a hot wire from the source using speaker wire or something similar until it turns on for you at

...test or just just excess coolant running off". All these coolant issues had happend within 48 hours so to eas my nerves I'd like to know a little more insite... Please help thanks Steve on ...

...fuses and the 3 relays check ok......made check with obd2 for error codes.....no codes came up. Also installed new thermostat. HELP!!! The fans are turned on by the PCM, if the PCM is not telling the ...