2000 Ford Focus "tamper proof light" Questions

Ad

Question about Ford Focus

1 Answer

...plug that has a bolt in the center of it that holds it on. You may need to buy tamper proof sockets to actually remove the switch. They look like torx bits but has a hole in the center of

Ad

Question about Ford Focus

2 Answers

...AND NO MAF WHAT IS VAT ANY HELP WOULD BE GREAT sounds like the mass air flow sensor. It is in the intake line squareish part with 2 tamper [proof torque screws. what does PO 102 means on 1998 ...

Ad

...the car run rough and stall, hope this helps Mine did this, it was the mass air flow sensor. $140 at autozone, 2 tamper proof torque screws and a plug. Dealer tried to charge me $430 for this

...tamper hall effect sensor, and output resistors. A drill proof metal shield is also staked over the sensor housing. The passlock sensor mounted to the ignition switch assembly is located inside the ...

...tamper proof screws which takes a special tool to take off it could be a number of things like the starter relay, starter fuses, ignition coil,distributor cap and rotor button or the vehicles main ...

is a rectangle held in place by tamper proof torx screws.If you unplug this the engine light will come on but if it stays running while driving then you can be pretty certain this is causing a problem

...tamper hall effect sensor, and output resistors. A drill proof metal shield is also staked over the sensor housing. The passlock sensor mounted to the ignition switch assembly is located inside the ...

Question about Ford Focus

1 Answer

...tamper proof torx head drivers you can take just the sensor off the metal housing, be careful there are two fragile wires visible when you take the sensor out of the housing. (they resemble a light ...

...the harness back by the tail lights. Never had a problem again. If you're gonna try to replace the switch you will need tamper proof torques bits just FYI. Good luck. Let us know how it turns

Question about Ford Focus

2 Answers

...tamper-proof connectors, so be patient and think before you damage the connectors. Use a tiny amount of contact cleaner, plug and unplug several times, and reassemble. The circuit will work perfectly ...

Not finding what you are looking for?
2000 Ford Focus Logo

5,166 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2003 Ford Focus
2003 Ford Focus

2,055 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2004 Ford Focus
2004 Ford Focus

897 Questions

2006 Ford Focus
2006 Ford Focus

840 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...