2000 Ford Focus "switch work 1" Questions

Ad

Question about Ford Focus

1 Answer

...work The fan won't turn on Check to see if you are getting voltage to the blower motor if you are the motor is bad if not check the fan speed switch. 1 2 3 or low medium high if you get ...

Ad

...1 second. Switch ignition OFF. Remove key A. Insert key B into ignition switch within 5 seconds. Turn ignition switch to position II. Wait 1 second. Switch ignition OFF. Remove key B. Within 10 ...

Ad

...switch 1. 2. and 3. but working on 4. locate the fan speed switch usaly located in the heater box on floor by the feet compartment on passenger side of car usaly has a two wire plug it is not the ...

Question about Ford Focus

1 Answer

...switch. the contact for the compressor is making only at speed 1 and goes off when you choose 2 to 4. trace the wires that went to your switch and if you have an ohmeter, you will find 6 wires comes ...

...work on settings 1-3 I have a 2002 Ford Focus Zetec. Recently the A/C fan switch has stopped working on settings 1-3, only on setting 4 - any solutions? common problem, replace the blower motor (fan) ...

...switch only has 1 speed, only works on high and drips water below glove box THE BLOWER MOTOR RESISTOR FAULTY IF YOU HAVE ONLY 1 FAN SPEED ALSO AC AND HTR CONTROL SWITCH BAD.WATER LEAK UNDER GLOVE BOX ...

...switch several times to work the lubricant in. A stuck switch will often start working again. 2) Replace the driver's door switch. Best of luck and hope you found this answers your problem. Regards, ...

Question about Ford Focus

1 Answer

...work, bought a new battery and fitted it, needs re-programming but don't know how to do it. Telephone: Fax: VAT Registration No.: Infrared remote control NOTE: Infrared emitter can be seen at front ...

Question about Ford Focus

2 Answers

...work on the 2 and 3 setting. I replaced the resistor nothing. Took out blower and hooked it up to 12 volts it came on. So I went and bought a new control for the speeds. It only works on the highest ...

I have a 2003 Ford Focus, the air conditioner works on fan setting 1, but shuts off when fan is switched to level 2, 3, or 4. Any ideas? Bad blower resistor or switch.

Not finding what you are looking for?
2000 Ford Focus Logo

5,166 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2003 Ford Focus
2003 Ford Focus

2,055 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2004 Ford Focus
2004 Ford Focus

897 Questions

2006 Ford Focus
2006 Ford Focus

840 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...