2000 Ford Focus "replace front oil seal" Questions

Ad

...oil, you wont need freon your system should have freon, unless it leak out of the a/c compr front seal, will be recover and reused, the system will have to be flush. with labor and parts your looking ...

Ad

Question about Ford Focus

1 Answer

...front wheel and wheel arch liner. the sensor is located next to the right hand drive shaft at the rear of the transmission. disconnect the wiring plug from the top of sensor, pull out retaining pin, ...

Ad

Question about Ford Focus

2 Answers

...front of the engine ,these deteriorate and cause some problems regarding idle and running rough renew them anyway if car is over 5 yrs old is best advice YOU COULD BE USING LOT OF OIL AND FUEL ...

Question about Ford Focus

1 Answer

replace said oil seals hi if your engine 22R front engine first in side timing cover where engine bully fitted there is oil seal, next valve cover front side between cover and head there seal not like

Question about Volvo Cars & Trucks

2 Answers

replace front crankshaft seal Oil foams out around the front main seal of my 1999 v70 xc. I bought it doing this. I replaced the oil breather system, oil pump gaskets and front seal and timing belt ...

...replace front main seal, too? Is it worth it to replace the front main seal or front crankshaft seal while replacing water pump? oil seal failure is the main killer of rubber timing belts . Oil can ...

Question about Ford Focus

2 Answers

...front crankshaft oil seal is under all the components that must be removed to replace the timing belt. The standard labor time to replace this seal is 4.0 hours for the 4 cylinder and 4.8 hours for ...

Question about Ford Focus

1 Answer

...replace the rear seal , the transmission will need to be removed. If its the front, then the harmonic balancer will be removed. $380 sounds cheap. As you will need a oil seal, oil pan gasket, oil, ...

...removed oil pan replaced filter&gasket replaced rear ext housing seal only leaks when driveing ou may need to remove the front pump and replace the seal on the pump and the converter seal as ...

Question about Ford Focus

1 Answer

Replace O-ring. - Remove front end reinforcement. - Detach steeling spindle from steering gear. - Remove vane pump for power steering unit (lines remain connected). - Disconnect plug connection to oil

Not finding what you are looking for?
2000 Ford Focus Logo

5,166 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2003 Ford Focus
2003 Ford Focus

2,055 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2004 Ford Focus
2004 Ford Focus

897 Questions

2006 Ford Focus
2006 Ford Focus

840 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...