2000 Ford Focus "install drive belt 2002" Questions

...the tensioner rotates in a counterclockwise direction. Remove the accessory drive belt. Rotate the tensioner clockwise. Remove the belt. Installation To install, reverse the removal

...install the new belt according to your routing diagram. · Rotate the tensioner again to allow the new belt to slip over the tensioner pulley. Release the tensioner again. Replace the drive belt ...

...Install the new pulley on the crank. There is a keyway on the crank that the pulley must fit over. Push it firmly into place by hand first, to avoid binding when you torque it. Torque the bolt to ...

...drive_belt_routing_diagram.htm It helps to list what engine ....... Accessory Drive 2.0L Zetec without A/C ItemPart NumberDescription 110344Generator pulley 219A216Belt idler pulley 33A733Power ...

...drive cutout in the frame and compress it to relieve the tension on the belt. the reverse the same procedure for install. If it a multiple belt installation located the mechanical tension for each ...

...hub and the crankshaft pulley. Oil pan. Lower the vehicle. Install or connect the following: Power steering pump. Alternator. Drive belt tensioner. Drive belt. Is there a alignmark on the ...

drive belt Water pump pulley Water pump Water pump gasket To install: Clean the gasket mounting surfaces. Install or connect the following: Gasket Water pump. Torque the bolts to 89 inch lbs. (10 Nm).

...DRIVE BELT Find the bolt holding your alternator. Loose it up, and tilt your alternator down, so you can get your drive belt loose, and change your alternator/. on the drive belt itself.. it looks ...

install a timing belt on my galant Remove the drive belts, crankshaft pulley, and timing covers. Align the timing marks on the camshaft and crankshaft and r+r the belt need help inspecking timing belt

...Install the drive belt to the accessory drive pulley.    Rotate the drive belt tensioner clockwise.    Install the drive belt to the alternator.    Ensure ...