...sensor malfunction code P0340 from my code reader and needs to know how to repair the problem for a 2000 Ford Focus SE. My car will not crank. it sounds like you have bigger problems if your car does ...
...crank sensor still wont start Check to see if you have spark/fuel. If you don't have one or the other, you most likely have a bad crank sensor (spark), bad cam sensor (fuel), bad fuel pump if you ...
had a solid flywheel conversion and new crank sensors fitted and now the car wont start!!!1 crank sensors not right or bad pickup on flywheel if it has one
crank position sensor Where is the crank position sensor located it is located on the top of your bell housing.
...let it run ok. Is your sensor dirty? p1401 code is egr valve which honestly i don't think that would stop the car from starting,only other possibility i can think of is crank sensor,hope this ...
...crank sensor, cam sensor, air flow sensor, power relay, engine computer, etc.) - Ignition system problems, especially on older vehicles with the distributor (e.g bad ignition coil, commutator, rotor, ...
...crank sensor and it ran perfect for about 1.5 months and it has started happening, again. Maybe bad crank sensor again? it is possable/likely a bad ECTS (engine coolant tep. sensor), this can cause ...
...and is this common fault with focus You would really need it to act up at the garage, then they should look for crank signal, I have seen the wires backed out of the connectors on the crank
...any engine speed sensors crank sensors or cam sensors. the crank sensor would be by the crankshaft im not sure where the cam sensor would be and some vehicles wont have one im not sure if yours ...
...0189 camshaft position sensor I cange it stil wont start the cam sensor and crank sensor are in the same wiring harness it may have shorted out the crank sensor you need to check to see if it has ...
5,166 questions posted
Usually answered in minutes!
2,612 Questions
2,055 Questions
1,226 Questions
897 Questions
840 Questions