2000 Ford Focus "changing sway bar bushings" Questions

Ad

changing 2000 ford focus sway bar stabilizer pin how do you change a left side sway bar stabilizer pin? are you refering to the 5/16" bolt with 4 rubber bushings? 2 on each end? If so, cut them. ...

Ad

...gone away. Second problem is that the car engine hesitates and wants to shut off unexpectedly, i do have a manual trans. check your front links ,control arm bushings ,ball joints ,sway bar ...

Ad

Question about Ford Focus

1 Answer

...changing the bushings, did you check the sway bar itself or the degree of the linkage bolts, in time seeing as it's 16 years old now it may have been stressed and bent, buying smaller linkage bolts ...

sway bar bushings on the frame and the sway bar end links, it's common for the sway bar bushings on the frame to go bad and the sway bar end links bushings to go bad. You can buy the urethane bushings

Question about Ford Focus

1 Answer

...sway bar bushings or do you have to replace the whole swaybar? YES YOU CAN CHANGE THE BUSHINGS MOST OF THE TIME ALL YOU NEED IS WHAT THEY CALL SWAY BAR LINKS IT A LONG BOLT WITH RUBBER BUSHINGS ON ...

...sway bar bushings and gonna do tie-rods soon.. Any hints... check the rear track bar bushings this runs from side of axle up to body. also the lower link bushings in rear. have you checked air ...

...sway bar. The sway bar end link bushings may be worn and needs to be replaced, buy the sway bar end link kit with the urethane bushing. They last a life time and cost about $45.00 for both sides at ...

sway bar bushings,chrysler service bulletin calls it a squak, but can sound like a rubbing, a clunk etc the common factor is this is really noticeable the colder it gets outside The 2 guys that posted

...sway bar bushings, wheel bearings, loose lug nuts on wheels, upper strut support bearings and plates, and CV joints in axle assemblies. Good luck with this! I have a 2006 Chrysler van.T & C. When ...

...sway bars with no change. most of the time, it's the trac bar bushing. if it's worn, you can death wobble over 40 mph. replace it with a polyurethane bushing. I had the same proble, and it is ...

Not finding what you are looking for?
2000 Ford Focus Logo

5,166 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2003 Ford Focus
2003 Ford Focus

2,055 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2004 Ford Focus
2004 Ford Focus

897 Questions

2006 Ford Focus
2006 Ford Focus

840 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...