2000 Ford F350 Super Duty Super Cab "power brakes trailer" Questions

...brakes are applied but I get no power at the rear of the truck on brake application.I also have no power to charge the 12v at the rear of truck,I have installed the large fuses reqiured.I am plugged ...

...power to lights, all ok Checked fuses this is where I found the problim. I checked all fused that had anything to do with trailer braking, or trailer towing. There are many. Check your owners manual ...

...the brown is tail lights, and the orange wire is 12volt feed for if there is a battery on the trailer that needs to be kept charged for break away safty brakes. no power to electric brakes on ford ...

When I hook a trailer to my 2000 f350 7.3 super duty. It looses power pulling. If not hooked to trailer, truck runs great. Check for the trailers brakes dragging.

...power to trailer turn signals and brake lights. everything else works. make sure to check the wiring on the trailer and to make sure that there is no damage or loose wireson the hook ups themselves. ...

...trailer light connector ( use a test light or voltmeter to test for power at the trucks wire harness first to see if it's the truck or the trailer ) and work your way back to the lights. Clean the ...

...trailer plug is controlled by several fuses or a light control module if it is a module then thee will be a fuse for it (module) if each power circuit is individual ( brake lights , park lights , ...

...power to the brakes themselves. There are 2 wires to each brake... a ground and a power. Test across both wires to make sure you have power and ground. You can also hook another trailer to your truck ...

...case the on position of the ignition alone would not provide power. Have a second person engage the brakes and blinkers wile testing.Depending on the trailer type it could even be for reverse