2000 Ford F350 Super Duty Super Cab "getting transfer case" Questions

...transfer case to the front member I've taken out the shaft from the transfer case to the front member. i've released the clips from all three u bolts but i can not seem to figure out how to get them ...

transfer case. This a 4x4 do I need to rebuild the transfer case or just change the bearings. I also would like to get more power out of my 7.3 liter with ATS turbo. id repbuild cuz your bearings have

transfer case jumpin out of gear when get in a bind This is probably a worn case, where the shift rail shaft is supported

...getting the vehicle home, I crawled under removed the skid plate and found the shift motor and removed it. I was able to put a wrench on the knob that sticks out of the transfer case and shift it to ...

...will not work, the indicator on the dash will not light up, checked all fuses, can't get any power to the transfer case. Very slippery here, NEED my 4x4,,,,HELP the switch in the truck might b ...

...transfer any power to the motor, in that case your problem is coming from a relay or possibly a broken wire to the power side of the switch. Check to see if your grounds are good at the switch and at ...

...all you really have to do is change the oil, fuel filters, air filter, and transmission filter. If you have 4x4 get the differentials service as well as the transfer case and you should be good to

...transfer case , But im told that ATF gos back in but that is not what is in there . It looks and smells like 90 wight . Yes, ATF belongs in there. Change the fluid and it may just start working fine. ...

...transfer case will not engage. The truck has manual hubs and the switch has 2 wheel drive 4 high and 4 low. It will not go into 4 high or 4 low. I am not sure where to start looking, I have been told ...

...transfer case on my truck blew apart and the driveshaft came loose ruining the wiring harness . Hello, I would recommend Car-parts.com for a Salvage site. You will get prices and the part can be ...