2000 Ford Expedition "put right side window back" Questions

...put it back together the right way? I've pulled the door apart and put the window back in the track. Chances are that it either broke connection to handle which is fairly easy or broke plastic clip ...

...right side of panel pull out then up, screw behind it remove it, remove red lense plastic piece on bottom of door small screw driver careful breaks easily screw behind it remove it, remove bezel ...

...right hand side of the inside of the door you wil see a bar with either one or 2 10mm nuts or bolts these are to align the window in position you can normally tell if they have moved as the paint on ...

...right out. Yes it takes a bit of time but once clear I was able to take a hex head to the motor and begin to close it a bit and then tried it with the button and it closed. After trying it several ...

...put the year of the vehicle, water in the pass side can be the heater matrix or the drain for the shuttle is blocked and rain water is getting in as it cannot flow out. it can also be the seal at the ...

...put in my celica and a mechanic suggested it might be a short from that window running down my batttery and suggested for me to disconnect it. Can you tell me where to disconnect the fuse for this ...

...all the windows, are you sour you got the right part. Before you put everything back, test the window first. Sounds like the problem is in the main window control switch located on drivers

right side power window,, cable for window motor came off window, how do you put it back on , 2004 grand cherokee,, Replace it is the only viable option, they come off due to wear on the plastic wheel

...right side power window goes down, but not back up... then speedomoter and odometer stops working (but not the other gauges) and when taking apart the right side door to get window back up... motor ...

...put the glass up and it comes right back down There is a lose bolt inside the door. The windows is able to have enouigh play to slide to the side or the center of the track....ensure all bolts are ...