2000 Ford Expedition "hit dash turn heater" Questions

...HEATER/BLOWER IS OFF. Fords systems will still blow air even when off. does the clicking get quieter wehn off? also, you can get it to stop blowing by turning on the recirculator. its a button with a ...

...dash back out and seen that the blind door was open but only like 4 inchs so i pulled the door all the way off thinking that if if got full heat off the heater core it would get as hot as it could ...

HIT THE DASH. I would venture to say that if you hit the dash and the motor started running then the problem would be in the heater control assembly mounted in the dash, like bad wire to Heater switch

...turn my front dash heater on thats supposed to defrost my front windshield. my main heater works and my feet heater doesnt work either. any solutions? or if I didnt say my problem clearly enough get ...

...dash while the heater was going. When you turn left or right, the steering column must be tugging on the wiring, and when you hit a bump it's just enough to jar the connection loose. Check where the ...

...in the end by the plastic fan and the bearing will allow the fan to drop down and cause a loud noise when running. To check turn off the heater motor fan on the dash and see if the noise goes

...DASH MAY BE BAD. TRY THIS- TURN THE BLOWER SPEED TO HIGH W/ THE KEY ON AND HIT THE HEATER MOTOR WITH A HAMMER----LOCATED UNDER THE WINDSHIELD AND BESIDE THE RF FENDER------ IF IT TAKES OFF YOU NEED A ...

hit the top of the dash and it will work. sound like you need a new blower motor. example- mine im having issues with blower- doesnt turn off while driving- but sometimes when i start my car it doesnt

...dash wiring diagram for 1989 Trooper. Please. Heater/AC remain on after starter turner off. Battery then runs dead. Radio also runs then turns off after driving for awhile. Or radio will turn off if ...

blower motor does not turn on unless you bang dashboard or hit bump in road bad or loose heater switch behind dash...loose wires on switch...blower motor fuse loose in fuse box...