2000 Ford Expedition "door blend motor" Questions

Ad

...blend door, center of the dash at the bottom remove black cover, its above the white stepping motor, the motor turns the door with temp selection, when the door breaks you have no control over temp ...

Ad

Question about Ford Expedition

1 Answer

...under the passenger side of the dash. The motor moves a "blend door" that blends the airflow between the different settings for the dash. Test for proper power to the motor and replace as

Ad

...blend door 3 ? Headliner airflow 4 ? Auxiliary mode door 5 ? Floor airflow 6 18476 Heater core 7 19860 Evaporator core 8 19805 Blower motor The auxiliary A/C and heating system has the following ...

...blend door motor that has failed or the blend door itself is stuck or broken. If you have manual A/C controls it could also be the potentiometer(the switch that controls the heat) or if you have EATC ...

...blend door inside your air box were the heater core and the evaporator is for your heat and your ac the blend door is not moving either your vacuum control for the blend door is not opening or it ...

...blend door is not working. Manual A/C The manual climate control system heats or cools the vehicle interior depending on the function selector position and the temperature selected. The function ...

Question about Ford Expedition

1 Answer

...blend door, go to the center of your dash look down towards the floor right at the bottom on the hump (tunnel area) you will see a black or same as interior color, cover it has small slits cut in it, ...

Question about Ford Expedition

1 Answer

...blend door geting broken, make sure to have the bleen door inspected for posible broken part, be carrefull some mechanics will misdiagnose saying the blend door motor is bad, ask to doble check for ...

Question about Ford Expedition

1 Answer

...I can check and what color is it? the problem is caused by a sticking air temperature control blend door and or a defective intermittent blend door actuator motor, very common failure on this

Question about Ford Expedition

1 Answer

...three possibles, the control unit on the dash is not moving the blend door, the blend door motor is not working, the plastic blend door inside the same housing that the heater core is in, is

Not finding what you are looking for?
2000 Ford Expedition Logo

3,327 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Expedition
1999 Ford Expedition

1,825 Questions

1998 Ford Expedition
1998 Ford Expedition

1,627 Questions

2003 Ford Expedition
2003 Ford Expedition

1,696 Questions

2001 Ford Expedition
2001 Ford Expedition

1,161 Questions

1997 Ford Expedition
1997 Ford Expedition

1,048 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...