...come out of over drive. what is causing this problem? you will have to take it to get the tranny checked it is probably an electrical problem or the trans is stuck in limp home mode for some ...
...limp home mode and the ETC sign comes on Your going to have to get your Expedition's scanned to address the issue your having. There are to many things that can cause what you have described and will ...
Question about Ford Expedition
...limp home" mode programs.) You should get the vehicle serviced as soon as possible, but in most cases, the vehicle will continue to operate, though you run a risk of it dying or not starting.* The ...
Question about Cars & Trucks
...when the problem that caused it is repaired, which you have not done yet, whatever you did was not the problem that forced the vehicle into limp home mode keep doing the diagnostics and fix it
...causes --wiring--ETS limp home valve code p1193 refers to ETS -limp home valve --on===causes --Low RPM code p0302 refers to cylinder 2 misfire detected===causes--engine mechanical ...
Question about Cars & Trucks
...Limp Home mode it means that a serious fault has occurred in the electronics or a mechanical failure has been sensed. What you need to do now is have the computer control system scanned for fault ...
what can cause my car to go into limp home mode about a 100 different failures in the electronic control systems will cause this limp mode, have it tested by the dealer to determine the cause.
Question about Ford Expedition
...causes this? the .pcm puts it in limp mode and it will stay in mode until light is turned off. You need to get the trouble code, repair it, erase the codes (with a scanner that retrieves the codes), ...
...limp home mode 2010 turbo diesel Holden captive gone in to home limp mode Hi Heidi A code fault reader needs to be plugged into your vehicle, there are to many possible faults that can cause this to ...
...limp home mode when car is turned xr6 Ford Falcon 2003 going into limp home mode when car is turned on when motor is warmed up after being run. What could cause this? theres a solenoid that selects ...
3,327 questions posted
Usually answered in minutes!
1,825 Questions
1,627 Questions
1,696 Questions
1,161 Questions
1,048 Questions