2000 Ford Crown Victoria "vic shifting problems" Questions

Ad

Question about Ford Crown Victoria

1 Answer

lost 3rd gear and overdrive on my 92 crown vic over drive started to slip but was ok at higher speeds, was on highway at about 60 + mph shifted into overdrive and about a minute later lost od ...

Ad

Question about Ford Crown Victoria

1 Answer

Vic transmission problems I have a 1999 Crown Vic. I have noticed a slight vibration when it shifts into high gear. It does not do it all the time, but it has started to happen more frequently. I have

Ad

...problems as being to low. I would add that if you have to replace the transmission - you need to consider that the car may not be worth the cost. Good Luck. my 85 crown vic has the same problem but i ...

i have a 99 ford crown vic and she will shift when the car is off but not while running i just change the transmission shift cable If you mean you can not move the shifter out of park with the key on,

...Vic that depends on transmission, non computer shift transmissions have a vacuum shift diagram. round cyclinder on back end of tansmission. if it goes bad it will cause your car to smoke, sucking ...

Question about Ford Crown Victoria

2 Answers

will eventually shift into drive. its the shift lock solenoid Started having same problem on my '94 Vic and some seem to think the Brake On/Off (BOO) Switch needs replacing

vic gear problems/gear shift wont lock wont kick into second gear/reverse, checked fluids still nothing. the gear shift wont lock. ex. while driving i can push gear shift from drive to second to first

I have a 1998 ford crown vic police intercepter and the transmission is sticking in first gear and when i let off the gas it shifts. what could be the problem? and oh i already did a trans flush. ...

vic gear problems/gear shift wont lock wont kick into second gear/reverse, checked fluids still nothing. the gear shift wont lock. ex. while driving i can push gear shift from drive to second to first

Question about Ford Crown Victoria

3 Answers

VIC IS STUCK IN PARK! WHAT COULD BE THE PROBLEM? The sensor on the brake pedal is not working. The brake pedal must be pushed before the shift level will release and allow shifting. If you are holding

Not finding what you are looking for?
2000 Ford Crown Victoria Logo

453 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...