2000 Ford Crown Victoria "transmission light" Questions

...light blinking is telling you there is a transmission code in the computer That unit is a strong transmission, but it does have electronics. You need to get it scanned for the code before you go any ...

transmission codes don't set the light to let you know there is an issue. you can go down to local auto parts store and have them pull the codes and se if there are any transmission codes. the getting

...light came on night before. Visual check-no problems found. No odors, no hot wires found. Fuel pump replaced 6mos ago. Engine was running fine, transmission rebuilt in December, now seems slow to go ...

...will scan for trouble codes for free, they will plug a hand held scanner into the cars port, and read any codes. Since the overdrive light is flashing, it is obviously a transmission related

...light came on. Is this a real serious problem because we are going on vacation on monday and need the car. The jerking is most likily the transmission. Changing the transmission fluid/filter should ...

...light on? The line pressure is too high in the transmission. This is either from a bad epc solenoid in the transmission or the computer commanding the pressure high from a bad MAF. If you have a bad ...

...light keeps blinking or flashing. Check the wiring on the TCC Transmission Converter Clutch solenoid at the trans and the PCM . It is possible the PCM is bad . BBB Industries online has free wiring ...

...light on your dash, that means you need to take your car to the dealership and have the car diagnosed. The computer is sensing that something is wrong with your car and the only way to tell is to ...

...light is blinking because the transmission control module has detected a fault in the transmission operation, most common is slipping as measured by the input and output turbine shaft speed sensors. ...