2000 Ford Crown Victoria "change switch vic" Questions

Ad

Question about Ford Crown Victoria

1 Answer

VIC HAS NO SPARK AND NO POWER TO FUEL PUMP CHECKED RELAYS AND FUSES CHANGED CRANK AND CAM SESOR LOOKED FOR BAD GROUND AND BROKEN WIRES AND HELP PLEASE DID YOU CHECK THE FUEL PUMP SHUTOFF SAFETY SWITCH

Ad

Question about Ford Crown Victoria

2 Answers

...switch... you need to change seat motor and switch should come together If you are saying it works if you fool with control switch the the switch assy is at fault, if that is not the case you will ...

Ad

Question about Ford Crown Victoria

1 Answer

...switch (need to place car in neutral in order to be able to start and shift into gear). Should I change my ****** fluid and filter, or are those stories about not changing high-mileage ****** fluid ...

...change break light switch is locate along the break pedal is a plug and play part no tools needed $15 for swith at auto zone. note if your head lights dont work than look into lcm plus is always good ...

...switch but no change please help! run a presher test on your fuel pump.check your fuel filter. have nice day A few things here..The timing is off.It needs a timing chain,Theres a fuel issue,the mass ...

Question about Ford Crown Victoria

1 Answer

...vic police package, fan spped only works on high, have changed switch and blowere motor resistor under hose located by 2 hoses and still only works on high speed any ideas? Steve YOU HAVE A FAULTY ...

1994 Ford Crown Vic - Tail Lights, Dash Panel and License plate light don't work. I changed the proper fuse, still nothing. HOw can I fix this headlight switch DOA

...Vic One day it just stoped blowing no A/C or heat i checked all the fuses and relays and they are fine so i guess its the blower motor and i want to know the location and if is easy to chang \??? Or ...

Question about Ford Crown Victoria

1 Answer

...change a window switch on a crown vic Lift up on the front of the window switch panel. itwill snap out. Disconect the electrical connectors. relese the 4 locking tabs and remove the switch. Reverse ...

...Vic: "turned ignition switch to start - heard pop - no electrical power" - it turned out to be a negative clamp and a cable coming from the battery - the contact went bad and suddenly disconnected. ...

Not finding what you are looking for?
2000 Ford Crown Victoria Logo

453 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...