1999 Ford Crown Victoria "ohm meter checking coil packs" Questions

...Use an ohm/volt meter to check the ohm's of the injector, should be about 12.5, but 11 to 15 is in range. Also check the plug, should have 12 volts on one wire with the key on. Let me know. ...

...of range, replace the coil or coils as necessary. Read more: How to Check Coil Packs With a Voltage Meter ' eHow.com ...

ohm meter to test the coil pack. if you need to know how to remove the coil pack let me know, to test put on ohms should not have more than 2 1/2 ohms restance betweent coil lead to coil connector. If

...to see if there is voltage going to the Ignition coil. Use a fluke meter or multi meter and check the connector from the coil pack. Or, ohm check each spark plug wire individually and one by

...you will have to check the injector with an ohm meter. resistance between the prongs should be between 11 to 15 ohms. check another injector and they should be relatively close. Let me knowGood ...

...ohm meter), however, the coils short through the outer casing. Try running the car when it is dark out and spraying the coil packs with water. Listen for clicking and watch for arching from the coils ...

...will have to check the injector with an ohm meter. resistance between the prongs should be between 11 to 15 ohms. check another injector and they should be relatively close. Let me know Good luck ...

...OHM meter to check the resistance Contributing Member Join Date: Jul 2003 Location: Montreal, QC Canada Posts: 8,805 So you got codes P0300, P0304 and P0305 You need to check primary and secondary ...

ohm meter to it? You can use a standard ohm meter, set the scale to 20K ohms and take a reading between the front spring (located inside the rubber insulator) and either one of the contacts on the top

...ohm nominal. i recently had a coil pack go bad on a '97 crown vic where the number 8/2 tower was reading good resistence when i kept the meter probe steady. if i moved it around while still making ...