brake to release check the rear end and check if the cable is broken/. frayed and jamming the brakes on . Check for rusted cables. If rear brakes are discs the check the brake action of the hand brake
...brakes if the cable is not working, the cables themselves could be frozen? or something mechanical inside the drums or calipers in the rear that could be stuck and not moving. there is a possibility ...
...rear brakes squeal when applied when first driven cold. Does not do it after it has been driven and warmed up. brakes typically only last about mas 30k miles. might be the brake lining warning shims ...
...I depress the brake, the left turn signal light on the instrument panel lights up and the right rear brake light does not work. When I turn the left turn signal on, all the brake lights in the ...
No brake lights. Brake light above rear window works though. I've checked the fuses and bulbs. What else could it be? The brake pedal switch. there's a recall for inoperative or continuous ...
rear brakes working properly all the load will be transfered to the front brakes causing uneven braking and in wet or slippery conditions front wheels will start locking up causing lose of control the
...or damaged parking brake cable. Start by troubleshooting the mechanism under the dashboard, and move backwards to the rear brakes. It is possible that one of your adjustors in back has rusted
how to replace rear wheel seals remove the rear diff cover remove the rear brake drum/rotors rotate the rear driveshaft until you can see the bolt that holds the center pin slide out the center pin ...
rear wheels for a look-see. Inspect brakes and all hardware. Have then lubed. Make sure linings or pads are not glazed to eliminate squeaking noise.Make sure parking brake works properly and smoothly.
448 questions posted
Usually answered in minutes!
178 Questions
146 Questions
43 Questions
13 Questions
14 Questions
