2005 Ford Ranger "wiring 2003 change" Questions

I have a 2003 Ford Ranger 3 liter. I just changed I have a 2003 Ford Ranger 3 liter. I just changed the Spark Plugs and Fire Wires, did the gapping on all six Spark Plugs, but now when I drive it, it ...

...2003 Ford Ranger radio wiring diagram ... After Market radio install issues - Ranger-Forums https://www.ranger-forums.com > after-market-radio-in... Mar 23, 2021 - My daughter (16yo) has a 2003 Ford ...

I have a 2003 ford ranger xlt 5 speed with 90,000 miles. When i take off in 1st it like sputters, then smooths out, same thing 2nd and 3rd. Have changed the plugs, wires, gas filter, injector cleaner ...

why does my 2003 ford ranger miss fire on cyl #3 plug and wire check to be good changed coil pack # 3 still misfires week injector

My 2003 Ford Ranger is acting a bit sluggish. It is like it is sputtering, maybe not getting enough gas to it. I have changed the fuel filter, spark plugs, & spark plug wires. What can be causing ...

2003 ford ranger edge regular cab 3.0 Liter 6 Cyl.. 2 problems...Replaced Plugs and wires. Truck idles rough (especially after running for awhile) and misses when driving. You can feel the hesitation.

...2003 3.0 flex fuel Ford Ranger has a slight studder at low rpm acceleration. What could it be? Have replaced plugs, wires and fuel filter with no change. I checked the coil pack(distributorless) and ...

check engine bulb is burned out how is it changed out Remove instrument cluster[IPC] and replace faulty bulb if servicable.Some are hard wired to prevent tampering.

misfire 2003 ranger with2.3 i have po301 changed plugs,wires, injector, swapped coil pack .checked for vacum leaks,none found still have misfire. Check your cam. position sensor

...change the oxtgen sensor on a 2003 ranger, six cylinder? This is a difficult task. I recommend you get an expert to handle this for you. Also it will not be so expensive. See at ...