2002 Volkswagen Passat "front motor mount cost" Questions

...front motor mount. I am orig.owner with 52,000 miles driven and only dealer has worked on my car. These items will cost over $2,200.00. I am a woman so feel like they could be taken advantage of me ...

motor mounts on either side of the engine. If you see an oil dirt at the bottom of these mounts, they are likely worn out and should be replaced. That's a bigger job, probably about $500 at the dealer

...motor mounts. The loud screeching sound is made on purpose! The front brake pads have a metal "screecher" that rubs against the brake rotor (harmlessly) and makes a screeching noise to warn you that ...

...Motor mounts are fairly easy to replace, should cost about $200 MOST FRONT WHEEL DRIVES HAVE 3 MOUNTS. IF IT IS A LOWER ONE ON THE FRONT A BOTTLE JACK OR FLOOR JACK WILL HELP SUPPORT THE ENGINE WHILE ...

...motor mounts for 2004 Chrysler Pacifica Can i get an estimate? I don't know if I need front, side, back or what but...even if I needed all mounts what would it cost? I'm thinking it has 1 motor mount ...

...front motor mount and the upper motor mount? since it is a lexus i would not advise going cheap. the struts will probably cost around $350. the motor mounts will probably run around a grand since so ...

front driver side motor mount. I want to make sure I am getting the right part. Thanks. stop by a dealer parts guy and ask him to show you the illustrated parts breakdown. then you will know the exact

...ish My mechanic said the timing belt does not need to be changed. The motor mounts, however, wear out as in all cars. The one that wore out on my SX was the right front: $75 + labor to install

...front and rear motor mount now you have to slam it in park for the indicator to grab and if you smoothly put it in park the indicator says reverse and has alot of free play between drive and neutral ...

...front right motor mount bolt size? It goes through the large end of the mount and bolts to the engine Is there some reason you can't use a wrench to determine the size? Or do you mean you lost the ...