2003 Pontiac Sunfire "crank position sensors" Questions

...crank position sensor is located to the back of the engine to the left of the oil filter, it is right next to the oil filter on the back side of the engine. hope this helps. Please rate my fix as i ...

...crank shaft sensor is located. The Crankshaft Position Sensor is located under hood, center, rear engine area, mounted onpassenger side rear of cylinder head.Fig. 2: View of the Crankshaft Position ...

crank position sensor. The ICM can be taken off and tested for free at any parts store. The crank sensor circuit can be tested on the car with a multi-meter. Also small motors (like a fuel pump motor)

...crank position sensor.... it sits behind your harmonic balancer and tells the PCM what position the crank shaft is at at all times. These sensors aare around 30 dollars at a local parts shop but you ...

...pump is coming on, anyone can Help? Check the crankshaft position sensor.If the pcm doesnt see a crank sensor input,it will not pulse the injectors. change fuel filter.check pressure before ...

position switch , starter relay , battery cables and or connections could. Watch videos on youtube an learn How to Diagnose a No Crank No Start Issue - Nothing or only a Click When the Key is Turned -

I ran the OBII code on my 2001 Sunfire 2.2. Came back PO336, Crank position A circuit range/performance. Where is that sensor? What's involved in fixing it? Thanks look behind the Crank pully you

Engine won't start.What is the problem? Your problem could be a timing belt that has loss tension. Have you ever had timing belt replaced? if yes then the problem will be in your Crank Position sensor

...crank sensor, if so that would be my first check. well throttle body part or air induction system fuel suppose run through the fuel rails, air run through throttle body down to intake.if fuel ...

I have a 2000 Sunfire and it is running on 2 cyclinders,I have replaced coil packs and still runs the same. check the crank and cam position sensors