2003 Pontiac Sunfire "brake pads" Questions

...pads are worn, the noise is coming from the small tip that the brake manufacturer assemble on the pads to let you know when the pads need replacing Probably you need to change the rear brake

my brake lights won't turn off and the brakes are not engaged the brake light switch may be bad, or the brake pedal is not coming back enough to turn the switch off, look up under the dash where the ...

...brake pads are low, but it makes this noise all the time and it gets really loud when i step on the brake. what do i do? im going to change the pads this weekend. but is there anything else i should ...

...brake fluid before replacing pads, the level is going to be higher with new pads. Back brakes will be similar if it is disc, if it is drum, do your self a favor and have some one else do it or get a ...

I have extreme grinding when I slam my breaks, 2000 pontiac sunfire your brake pads are worn down to the metal replace brake rotors and brake pads ASAP.YOU ARE IN THE DANGER ZONE!!!!!

...pads. As ur driving, pull the brake handle gently in short bursts. It should clean off the rust then u might be good to go. If the rubbing turns to grinding or squealing that's a sign you need new ...

...brake pads. I have ABS do I have to do something before I do the work? 2003 Pontiac Sunfire No, just be sure you block the wheels and have the brakes on...Just spray your braking system with cleaner ...

'97 sunfire pulls hard to the right when brakes applied. Changed pads and rotors on front end and bleed brakes but made no difference. Any suggestions? When you changed the pads did you notice if one ...

...brake job cost, pads? Must the rotors be done or can just the pads be done? All shops will tell you that you need to turn or replace the front rotors when you do brakes. I personally only replace ...

...pads and rotors, heavily sprayed them with brake cleaner, (ABS safe). I dont know if this relates but i didnt experience this with my old gear. Did you install the brake pad spring anti rattle clips? ...