1994 Nissan Sentra 4-Door "tensioner" Questions

...center idler bolt tightening slightly but it will not lift off of the belt!? What gives? The idler tensioner might be bad. Can you get to move counter-clockwise at all either? The tensioner has a ...

How do I locate tension wheel to replace serpntne belts 04 sentra I am replacing serpentine belts on 1.8 04 Sentra. How do I locate the tension wheel(can"t find in manual). The serpentine belt runs ...

...for your Belt depending on your engine size and options (AC/No AC etc.) AND whether you have Tensioners OR Locking/Adjusting Bolts/Nuts. IF APPLICABLE: These point out the direction of

GET TENSION OFF THE IDLER PULLEY HOW DO YOU GET TENSION OFF THE IDLER PULLEY TO TAKE OFF THE ALTERNATOR OFF THE NISSAN SENTRA 2002 loosen nut in center of idler pulley ..then loosen tension bar with ...

Replace the timing belt tensioner on a 1990 Nissan Sentra I just bought a 1990 Nissan Sentra that needs a timing belt tensioner. Is this easy to replace? How would I do it? The belt tensioner is ...

...I had it repaired, the timing chain was replaced, the upper and lower sprockets were replaced, tensioner and guide. The problem the timing chain is still noisy, the engine now sound like an old ...

...belt loosen on 1 position an d the position it will tight the belt,try that man............. if the tensioner is loose then there must be slack at that point, unless you are loosening the tensioner ...

...passenger side
- remove plastic splash cover
- user 14mm offset wrench to turn belt auto-tensioner in clockwise direction
- block auto-tensioner from moving using locking mechanism ...

...timing chain guides and timing chain covers. Car is great but replacing timing kits (chain,gears,tensioners,guides) and timing cover (two times) is expensive and labor intensive. Are there parts ...

2000 WINDSTAR VAN SERPINTINE BELT TIGHTENING the belt is tensioned by an automatic belt tensioner pulley assembly, so what is the problem with the tension? belt noise?